No

 Name Surname Country Affiliation Article title
1. Jalal ABDALLAH Jordan Al.-Balqa' Applied University Electrical load forecasting by neural network.
2. Rasheed ABDULLAH Jordan Al.-Balqa' Applied University Chip formation process during gears shaving.
3. Zaid ABULGHANAM Jordan Al.-Balqa' Applied University A new type of rotating machine.
4. Tihamer ADAM Hungary University of Miskolc Design and analysis of discrete-time controller.
5. Emad Said ADDASI Jordan Al.-Balqa' Applied University Simulation of DC electric drive with cascade compensated control system.
6. Tareq AHMAD ABU SHREEHAH Jordan Al.-Balqa' Applied University Effect of poor thermal conductivity of thermoplastic on machining accuracy.
7. Oleg AKHREMCHIC Russia Tver State Technical University Designing of the automated monitoring system of the electric power for a hothouse enterprise
8. Ali AL.-AKAYLEH Jordan Al.-Balqa' Applied University Synchronization of inductive motors rotation in multi-motors drive systems.
9. Nasir AL.-KLOUB Jordan Al.-Balqa' Applied University Improving the tools and instruments durability by electrospark alloy.
10. Mohammad ALI NSOUR Jordan Al.-Balqa' Applied University Technology strategy.
11. Marcin APOSTOŁ Poland AGH - University of Science and Technology Mathematical model of hydraulic tensioning and transporting unit UNT15
12. Marek BABIUCH Czech Republic VSB-Technical University of Ostrava Configuration of remote switching module using TCP/IP protocol.
13. Marian BADICA France Service Robotique et Systemes Interactifs  An architecture for supervising the telemanipulation of an IAUV- mounted robotic arm.
14. Jaroslav BALATE Czech Republic Tomas Bata University Zlin The way of district heating output control by means of hydrothermal power systems - three modifications.
15. Aron BALLAGI Hungary University of Miskolc Design and analysis of discrete-time controller.
16. Stephen BANKS England University of Sheffield Approximate scalar control of nonlinear vibrating systems
17. Jerzy BARCHANSKI Canada Brock University Safety issues of autonomous mobile robots.
18. Józef BEDNARCZYK Poland AGH - University of Science and Technology Gniazdo obróbcze do formowania naczyń aluminiowych.
19. Nicu-George BIZDOACA Romania University of Craiova Shape memory alloy serial rotational link robotic structure
20. Nicu-George BIZDOACA Romania University of Craiova Shape memory alloy based robotic ankle
21. Wojciech BLACHARSKI Poland Gdańsk University of Technology Digital measurements of the feedback signals for observing behaviour of a drive
22. Eugen BOBASU Romania University of Craiova Reduced-order techniques for electrohydraulical systems 
23. Eugen BOBASU Romania University of Craiova Bond-graphs models of the hydraulic and electrohydraulic systems
24. Katarzyna BOJARSKA Poland Central Mining Institute Evaluation of usefulness of different approximation methods in soil monitoring
25. Matthias BOLDT England University of Sheffield Topology of dynamical systems and its numerical computation.
26. Martin BOSKO Czech Republic Technical University of Liberec Reverse engineering with negative and positive feedback regulation of photosynthesis responding to a harmonically modulated light
27. Mehmet BOZCA Turkey Yildiz Technical University Concurrent optimization of structures and controllers for robustness.
28. Sławomir BYDOŃ Poland AGH - University of Science and Technology Characteristics for a magnetorheological rotary brake - experimental investigation.
29. Jevgenijs CARKOVS Latvia Riga Technical University Asymptotic method for stability analysis of linear systems with diffusion coefficients.
30. Viktorija CARKOVS Latvia Latvian University On convergence of fourth moment Garch (p,q) process.
31. Madelin-Gabriel CATANA Romania Politehnica University of Bucharest Resource-oriented approach to develop setup planning prerequisites for the make-to-order manufacturing
32. Madelin-Gabriel CATANA Romania Politehnica University of Bucharest Setup planning and job scheduling using resource-constrained planning ingredients for the make-to-order manufacturing
33. Martin CECH Czech Republic University of West Bohemia  Pilsen Fractional  system identification for robust control - the moment approach.
34. Miłosław CHODACKI Poland University of Silesia Genetic programming for creating built-in self-test structures
35. Bronislav CHRAMCOV Czech Republic Tomas Bata University Zlin Utilization of fuzzy models for the prediction of the heat supply daily diagram.
36. Liana CIPCIGAN Romania Technical University of Cluj-Napoca The study of transformer inrush currents and means for their reduction.
37. Ionete COSMIN Romania University of Craiova Singular values and relative gain array in robust control design
38. Laszlo CZAP Hungary University of Miskolc Feature extraction for speechreading.
39. Janos CZEKKEL Hungary University of Miskolc Control of soluble aluminium by oxygen activity mesuring in LCAK steels.
40. Wojciech CZYŻYCKI Poland Cracow University of Technology Simulations of vane pump delivery control system equipped with deadbeat controller
41. Istvan DALMI Hungary University of Miskolc Control of soluble aluminium by oxygen activity mesuring in LCAK steels.
42. Daniela DANCIU Romania University of Craiova A method for time dealy cellular neural networks stability analysis
43. David DIAZ England University of Sheffield Dynamical systems, periodic orbits and knots
44. Ryszard DINDORF Poland Kielce University of Technology Model and characteristics of non-contact grippier.
45. Ryszard DINDORF Poland Kielce University of Technology Thermo-hydrodynamic model of non-contact face seal.
46. Mario DOBRILOVIC Croatia University of Zagreb Ground oscilation measurement during the demolition by blasting of industrial buildings with combinated method performed in split.
47. Cristian DOICIN Romania Politechnica University of Bucharest Computer aided approach for feature recognition from 3D models of rotational parts.
48. Ireneusz DOMINIK Poland AGH - University of Science and Technology Position stabilization in the system of magnetic levitation
49. Lubomir DORCAK Slovak Republic Technical University of Kosice Electronic realization of the fractional-order controlled object.
50. Lubomir DORCAK Slovak Republic Technical University of Kosice Creating web services with axis.
51. Karel DUDACEK Czech Republic University of West Bohemia  Pilsen The design of low cost ultrasound flowmeter.
52. Frantisek DUSEK Czech Republic University of Pardubice Laboratory multivariable hydraulic-pneumatic process.
53. Marie DVORACKOVA Czech Republic Tomas Bata University Zlin Identification of dynamic characteristic of test system for alkaline hydrolysis.
54. Kazimierz DZIERŻEK Poland Bialystok Technical University Increasing the accuracy of the digital system of the position measurement through extrapolation.
55. Rolf ERGON Norway Telemark University College Porsgrunn Informative score-loading contribution plots for multi-response process monitoring.
56. Dominik FABRICI Slovak Republic Technical University of Kosice Multi-agent application in storehouse control systems.
57. Sherif FAHMY England University of Sheffield Modeling nonlinear finite-dimensional systems by linear PDEs
58. Radim FARANA Czech Republic VSB-Technical University of Ostrava Database services for special measurement systems
59. Pavol FEDOR Slovak Republic Technical University of Kosice Modern methods of complex drives control.
60. Stanisław FLAGA Poland AGH - University of Science and Technology Archiving and providing access to process variables using the web.
61. Lubica FLOREKOVA Slovak Republic Technical University of Kosice Process approach to customer driven products quality.
62. Piotr FRĄCKOWIAK Poland Poznan University of Technology Dynamic and kinematics requirements for forming the non-homogeneous face toothing on CNC milling machine with continuous indexing
63. Piotr FRĄCKOWIAK Poland Poznan University of Technology Optimization of machining technology in forming the face toothing on CNC milling machine
64. Kazimierz FURMANIK Poland AGH - University of Science and Technology Quality of investigations and control of a stand up structure for testing of vibrations excited by dry friction
65. Taher GALOUZ United Kingdom University of Wales Institute Convolution method for contactless monitoring of wire diameter during manufacturing.
66. Miroslav GERA Slovak Republic U.S. Steel Kosice Slopping prediction model development based on acoustic signal.
67. Andrzej GESSNER Poland Poznan University of Technology Applications of direct drive in rotary devices
68. Piotr GIERA Poland Poznan University of Technology Communication protocol in a system for pouring moulds polyurethane foam.
69. Zygfryd GŁOWACZ Poland AGH - University of Science and Technology Mathematical models of 2H electromechanical system for investigations of transient phenomena and sensitivity.
70. Gerard GŁUCH Poland AGH - University of Science and Technology Electrodynamic technology aplication for plastic working of metals selected operations.
71. Zdzisław GOSIEWSKI Poland Military University of Technology Robust control method as new approach in control systems
72. Dariusz GRZYBEK Poland AGH - University of Science and Technology The modal analyst of the shell of the selected type of pump.
73. Robert HABER Germany University of Applied Science Cologne Predictive nitrate-control with simplified models of WWTP with intermittent denitrification.
74. Marcela HANZELOVA Slovak Republic Technical University of Kosice Environmental performance evaluation.
75. Grzegorz HAYDUK Poland AGH - University of Science and Technology Utilization of scripting programming languages for aiding in development and operation of SCADA systems
76. Milan HEGER Czech Republic VSB-Technical University of Ostrava Temperature measurement of highly heated materials with neural networks exploitation.
77. Zygmunt HENRYK Poland AGH - University of Science and Technology Utilization of scripting programming languages for aiding in development and operation of SCADA systems
78. Maciej HENZEL Poland Military University of Technology Experimental investigation of electrohydraulic actuator with H controller.
79. Pavel HERAJN Czech Republic Technical University of Liberec Application of differential evolution method for robust internal model control design.
80. Claudia HERNANDEZ England University of Sheffield Lyapunov's equation for nonlinear systems and stabilizing controllers.
81. Paweł HOERNER DE ROITHBERG Poland National Instruments National Instruments.
82. Daniel HONC Czech Republic University of Pardubice Laboratory multivariable hydraulic-pneumatic process.
83. Marcel HORAK Czech Republic Technical University of Liberec Mechanical - thermal stress of thin jumbo format glass sheet in interaction with stand.
84. Frantisek HRUSKA Czech Republic Tomas Bata University Zlin The laboratory model of time delay and distributed parameter  system.
85. Oscar HUGUES SALAS England University of Sheffield Discrete dynamics, fractals and mandelbrot set.
86. Constantin HUTANU Romania 1 Decembrie 1918 University Online learning using an original e-learning platform.
87. Katerina HYNIOVA Czech Republic Faculty of Electrical Engineering CTU Linear motor control in active suspension systems.
88. Endre IANOSI Romania Politehnica University of Timisoara Simplified uncertainty estimation method applied to the measurement of the dialysis liquid conductivity
89. Endre IANOSI Romania Politehnica University of Timisoara The quality control importance in the dialysis process
90. Maria IMECS Romania Technical University of Cluj-Napoca Modelling vector control system reconfiguration.
91. Eric INNOCENTI France University of Corsica Discrete event simulation of fire spread : a modular approach for the choice of a strategy of active elements management.
92. Christopher IRGENS England University of Strathclyde Principle and methods of software cost estimation based on design information using functional primitives and case based reasoning.
93. Dejan IVEZIC Serbia and Montenegro University of Belgrade Robust imc controller design for milling circuit.
94. Dejan IVEZIC Serbia and Montenegro University of Belgrade Mining plant's weak point's analysis as the segment of the logistical support.
95. Dagmar JANACOVA Czech Republic Tomas Bata University Zlin Optimization of shavings enzymatic hydrolysis.
96. Branimir JANKOVIC Croatia Department of Mining and Geotehnical  Imission measurements during tunneling operations.
97. Kazimierz JARACZ Poland Pedagogical University Testing the electrohydraulic servo-drive sensitivity to supply pressure changes.
98. Roman JOKL Czech Republic University of West Bohemia  Pilsen From monolithic to HLA based model of a safety critical system.
99. Jozef JUHAR Slovak Republic Technical University of Kosice Speech-enabled information services.
100. Andrzej JURKIEWICZ Poland AGH - University of Science and Technology High intensity of flow modern hydraulic pump selected parts modeling.
101. Andrzej JURKIEWICZ  Poland AGH - University of Science and Technology Examinations of components of the prestressing structure - the interurban highway flyover in Katowice.
102. Laszlo KADAR Hungary Budapest University of Technology and Economics TCP/IP based wireless data acquisition and control network.
103. Krzysztof KALIŃSKI Poland Gdańsk University of Technology A posibility of vibration surveillance of the hybrid systems by the optimal control at energy performance index
104. Krzysztof KALIŃSKI Poland Gdańsk University of Technology Vibration surveillance in modern milling machines by the spindle speed control
105. Bolesław KARWAT Poland AGH - University of Science and Technology
106. Rafał KLAUS Poland Poznan University of Technology Communication protocol in a system for pouring moulds polyurethane foam.
107. Artur KOCERBA Poland AGH - University of Science and Technology Automated systems of opinion of technical state rail roads of centre of transportation.
108. Petr KOCI Czech Republic VSB-Technical University of Ostrava Analysis of machine tools dynamic properties.
109. Oldrich KODYM Czech Republic VSB-Technical University of Ostrava
110. Jarosław KONIECZNY Poland AGH - University of Science and Technology Simulation tests of a controlled vibration isolation system with energy regeneration.
111. Peter KORYTKO Slovak Republic U.S. Steel Kosice InterMix computer prediction model - an effective way to control and identification the intermix area.
112. Roman KORZENIOWSKI Poland AGH - University of Science and Technology Gniazdo obróbcze do formowania naczyń aluminiowych
113. Karol  KOSTUR Slovak Republic Technical University of Kosice Mathematical models for prediction of slopping in ABOF.
114. Dariusz KOT Poland EMAG Katowice Borehole pump station with control system.
115. Andrzej KOT Poland AGH - University of Science and Technology Electrodynamic technology aplication for plastic working of metals selected operations.
116. Janusz KOWAL Poland AGH - University of Science and Technology Approximate scalar control of nonlinear vibrating systems
117. Stefan KOZAK Slovak Republic Slovak University of Technology Robust and fuzzy dynamic matrix control algorithm .
118. Jiri KULHANEK Czech Republic VSB-Technical University of Ostrava The speed of component - based applications in NET platform.
119. Czesław KUNDERA Poland Kielce University of Technology Impulse seal with an internal control system.
120. Tomasz KUŹMIEROWSKI Poland Bialystok Technical University Mechatronics step motor of the planar aerostatic relative base applied in paraller mechanisms 3D.
121. Janusz KWAŚNIEWSKI Poland AGH - University of Science and Technology Realization of the Smith's controller in PLC
122. Sebastian KWIECIEŃ Poland AGH - University of Science and Technology
123. Marek LACIAK Slovak Republic Technical University of Kosice The analysis of system of indirect measurement temperature.
124. Lenka LANDRYOVA Czech Republic VSB-Technical University of Ostrava SCADA applications based on .net architecture.
125. Anna LAWRYNOWICZ Poland University of Expert Systems and Agriculture Combination of expert systems and genetic algorithms for job shop planning and scheduling
126. Edward LISOWSKI Poland Cracow University of Technology Experimental studies on the hydraulic system with fuzzy logic controller
127. Jiri MACHACEK Czech Republic University of Pardubice Laboratory multivariable hydraulic-pneumatic process.
128. Musa  MAILAH  Malaysia Universiti Teknologi Malaysia Motion control of a mobile manipulator using resolved acceleration and active force control.
129. Jan MARIANOWSKI Poland AGH - University of Science and Technology Analiza funkcjonowania przekładni hydrostatycznej napędu wozu wiertniczego.
130. Miroslav MATYSEK Czech Republic Tomas Bata University Zlin Utilization of TCP/IP protocol for monitoring and control of technological processess via computr network.
131. Jiri MERTL Czech Republic University of West Bohemia  Pilsen Stability regions for PI/PID controller and Matlab program.
132. Piotr MICEK Poland AGH - University of Science and Technology Controlling a set of hydraulic pumping engines in 3-D prestressing.
133. Marcin MICHAŁEK Poland AGH - University of Science and Technology Registration of vibrations in 3D space besed on detection of point light source.
134. Adrian MIHAILESCU Romania Constantin Brancusi University The use of PIC 16F84 microcontroller in some devices for rubber industry
135. Mircea MIHAIU Romania University of Craiova Matlab simulation for voltage to frequency converter.
136. Mircea MIHAIU Romania University of Craiova On line testing for electronic technicians.
137. Osvald MODRLAK Czech Republic Technical University of Liberec Physical dynamic lab models for automatic control.
138. Karoly MOLNAR Hungary Budapest University of Technology and Economics DSP-based dynamic railway diagnostics system.
139. Sebastian MULARZ Poland AGH - University of Science and Technology Controlling a set of hydraulic pumping engines in 3-D prestressing.
140. Bakir NABIL Jordan Al.-Balqa' Applied University The bending behavior of hard coating layer produced by metallizing technique.
141. Milan NAVRATIL Czech Republic Tomas Bata University Zlin Cross-linking reaction of collagen hydrolysate as a nonlinear system with time-variable parameters.
142. Agata NAWROCKA Poland AGH - University of Science and Technology The gain scheduling in control hydrostatic transmission
143. Krzysztof NETTER Poland Poznan University of Technology A non-backlash transmission in application of tooling machines and robots
144. Zdenek NEUSTUPA  Czech Republic VSB-Technical University of Ostrava Modelling and control of opencast mining technology.
145. Petr NOSKIEVIC Czech Republic VSB-Technical University of Ostrava Nonlinear model of the pneumatic drive.
146. Darja NOSKIEVICOVA Czech Republic VSB-Technical University of Ostrava Lean six sigma and statistical process control.
147. Michail NOSYREV Russia UGG Academia
148. Petr NOVAK Czech Republic VSB-Technical University of Ostrava Control of omnidirectional mobile robot.
149. Mariusz NOWAK Poland University of Technology Poznań Computer simulation of the influence of physical parameters on thermal comfort.
150. Zenon OCIEPA Poland Technical University of Koszalin Design of economic control system on servomechanism example
151. Roman ORNACKI Poland AGH - University of Science and Technology Possibilities to assess the wear and tear characteristics in positive - displacement pumps on an example of selected parametric models of outlet pressure….
152. Nikos PANAYIOTOU Greece National Technical University of Athens An integrated business modelling approach for ERP-supported process documentation.
153. Michał PANEK Poland Cracow University of Technology Vane pump control in order to maintain liquid friction and leak tightness
154. Jana PAULUSOVA Slovak Republic Slovak University of Technology Robust and fuzzy dynamic matrix control algorithm .
155. Roman PAVLAS Czech Republic VSB-Technical University of Ostrava Eis of industrial enterprise and his database.
156. Jan PENICKA Czech Republic VSB-Technical University of Ostrava Speed control of DC-motor with tachometer and an elastic clutch by neural network.
157. Daniela PERDUKOVA Slovak Republic Technical University of Kosice Modern methods of complex drives control.
158. Karel PERUTKA Czech Republic Tomas Bata University Zlin Decentralized suboptimal continuous-time LQ control: usage of instrumental variable approach.
159. Karel PERUTKA Czech Republic Tomas Bata University Zlin Computer aided programming: tool for automating writing of matrix commands in matlab.
160. Pavel PESEK Czech Republic University of West Bohemia  Pilsen Delta-operator as tool of linear tracking problem design.
161. Emil PETRE Romania University of Craiova On adaptive of interconnected linear systems
162. Emil PETRE Romania University of Craiova Adaptive regulation of nonlinear time-varying uncertain processes
163. Jan PITEL Slovak Republic Technical University of Kosice Control of the energy system with supervising via internet.
164. Jiri PLURA Czech Republic VSB-Technical University of Ostrava Suitable methods of product quality planning.
165. Janusz PLUTA Poland AGH - University of Science and Technology Testing the electrohydraulic servo-drive sensitivity to supply pressure changes.
166. Vasile PODARU Romania Military Technical Academy Accessing relational databases with microsoft visual studio .NET
167. Andrzej PODSIADŁO Poland AGH - University of Science and Technology Simulation tests of a controlled vibration isolation system with energy regeneration.
168. Pavel POKORNY Czech Republic Tomas Bata University Zlin Computer control in the technology process filtration.
169. Mircea POPA Romania Politechnica University of Timisoara 16 bit microcontroller based solutions for controlling DC motors
170. Dan POPESCU Romania University of Craiova An H control method for systems with input delay
171. Dan POPESCU Romania University of Craiova On the reduced order nonlinear dynamic models for binary distillation column
172. Luminita Georgeta POPESCU Romania Constantin Brancusi University Pumps function and electrical motors monitoring with vibrations transducer
173. Michał PRACIK Poland Cracow University of Technology Quality requirements at simulation of control of self-excited vibrations of a mechanical system
174. Ales PROCHAZKA Czech Republic Institute of Chemical Technology Praha Wavelet use for image restoration.
175. Martin PROCHAZKA Czech Republic Tomas Bata University Zlin The measurement of silicon nano-composite transport characteristics and data collection of measuring devices.
176. Jaroslav PROKOP Slovak Republic IT Konzult Information reliability in project control.
177. Wojciech PTASZYŃSKI Poland Poznan University of Technology Investigation of work accuracy in electronic gearbox
178. Ivo PUNCOCHAR Czech Republic University of West Bohemia  Pilsen Using future information to change detection of stochastic systems.
179. Stanislav RACEK Czech Republic University of West Bohemia  Pilsen Model-based comparison of architectures used for drive-by-wire car control system.
180. Tahseen RAFIK United Kingdom University of Wales Institute Convolution method for contactless monitoring of wire diameter during manufacturing.
181. Waldemar RĄCZKA Poland AGH - University of Science and Technology A semi-active vibroisolation system using smart materials.
182. Henryk RUSINOWSKI Poland Silesian University of Technology Energy savings through optimal control of hot blast stoves.
183. Jiri SAFARIK Czech Republic University of West Bohemia  Pilsen From monolithic to HLA based model of a safety critical system.
184. Tomas SALOKY Slovak Republic Technical University of Kosice Intelligent robots and computer vision.
185. Andrzej SAMEK Poland AGH - University of Science and Technology Bionics - alink connecting engineering and the nature.
186. Zahra SANGELAJI England University of Sheffield Comparison of Control Strategies for the Stabilization of Non-linear Systems.
187. Bogdan SAPIŃSKI Poland AGH - University of Science and Technology Characteristics for a magnetorheological rotary brake - experimental investigation.
188. Jakub SCHAB Poland AGH - University of Science and Technology Multibody modeling method of lerge dimensional rails robot.
189. Balazs SCHERER Hungary Budapest University of Technology and Economics TCP/IP based wireless data acquisition and control network.
190. Milos SCHLEGEL Czech Republic University of West Bohemia  Pilsen Fractional  system identification for robust control - the moment approach.
191. Ulrich SCHMITZ Germany University of Applied Science Cologne Predictive multivariable temperature/flow control of a pilot plant.
192. Milan SCHMOTZER Slovak Republic University of Pavol Jozef Safarik Kosice Co-working agent groups.
193. Milos SEDA Czech Republic University of Technology Brno An application of Fuzzy Logic to signal detection.
194. Sona SEDIVA Czech Republic University of Technology Brno Virtual laboratories of sensors and optoelectronics.
195. Dan SELISTEANU Romania University of Craiova On vibrational control of a class of nonlinear systems
196. Dorin SENDRESCU Romania University of Craiova Body feed-positioning station-real and simulated experiments for Mechatronics education
197. Dorin SENDRESCU Romania University of Craiova Distribution based identyfication of rotary flexible link
198. Peter SERFOZO Hungary University of Miskolc Development watermarking test bench tool based on mojette transform.
199. Marek SIBIELAK Poland AGH - University of Science and Technology A semi-active vibroisolation system using smart materials.
200. Franciszek SIEMIENIAKO Poland Bialystok Technical University Mechatronics step motor of the planar aerostatic relative base applied in paraller mechanisms 3D.
201. Tudor SIRETEANU Romania University of Bath Skyhook control of vehicle suspension using a magnetorheological damper model determined by an inverse method.
202. Krzysztof SKRZYPCZYK Poland Silesian University of Technology Game theory based multi robot motion planning under uncertainty
203. Adam SŁOTA Poland Cracow University of Technology Coloured object Observable Petri Nets for modelling job shop systems
204. Jarosław SMOCZEK Poland AGH - University of Science and Technology Fuzzy logic approach implementation in transport devices controlling.
205. Lubomir SMUTNY Czech Republic VSB-Technical University of Ostrava University experimental education with laboratory models of real technological processes.
206. Pavel SMUTNY Czech Republic VSB-Technical University of Ostrava Usability on an educational Web pages.
207. Gabriela SOCHOVICOVA Slovak Republic Technical University of Kosice Process approach to customer driven products quality.
208. Marian STACHOWICZ USA University of Minnesota Soft computing for advanced control.
209. Marian STACHOWICZ USA University of Minnesota Vehicle detection and tracking in traffic control systems.
210. Wojciech STANEK Poland Silesian University of Technology Modelling of the influence of blast-furnace operational parameters upon the fuel subsystem of ironworks and environmental effects.
211. Liana STANESCU Romania University of Craiova WEBImTest-on-line software system for the content-based region query.
212. Roman STANIEK Poland Poznan University of Technology Compensation methods of thermal deformations in NC machine tool bodies
213. Jozef STASAK Slovak Republic University of Matej Bel Banska Bystrica Application of fuzzy sets apparatus in image semantic analysis.
214. Radek STOHL Czech Republic University of Technology Brno Machine vision aplicated on the zone detection for isotachophoresis.
215. Jerzy STOJEK Poland AGH - University of Science and Technology Possibilities to assess the wear and tear characteristics in positive - displacement pumps on an example of selected parametric models of outlet pressure….
216. Ian STOKES England University of Sheffield Logistic systems, diagonal approximations and periodic solutions
217. Neculai-Daniel STOLERU Germany Commerzbank Frankfurt on Main Applications on extended visual cryptography schemes.
218. Milan STORK Czech Republic University of West Bohemia  Pilsen Median and adaptive weighted median filters.
219. Milan STORK Czech Republic University of West Bohemia  Pilsen Fractional frequency synthesizer based on sigma delta V/F converter.
220. Vladimir STRAKOS Czech Republic VSB-Technical University of Ostrava Grafsit - program for operational problems solving.
221. Andras SULYOK Hungary University of Miskolc Control of soluble aluminium by oxygen activity mesuring in LCAK steels.
222. Ivan SVARC Czech Republic University of Technology Brno Stability analysis of nonlinear control systems using linearization.
223. Mieczysław SWATEK Poland Siemens
224. Martin SYSEL  Czech Republic Tomas Bata University Zlin Hybrid adaptive control using delta models.
225. Martin SYSEL  Czech Republic Tomas Bata University Zlin Extension of matlab web server.
226. Gusztav SZECSO Hungary University of Miskolc The function of the simulation in control structure design of the underground gas storage system.
227. Marcin SZEGA Poland Silesian University of Technology Calculation of outlet steam enthalpy from condensing turbine together with the checking of the validity of the results of measurements
228. Daniel SZEGO Hungary Budapest University of Technology and Economics Representing attributes and types in logical web document processing.
229. Janusz SZPYTKO Poland AGH - University of Science and Technology Fuzzy logic approach implementation in transport devices controlling.
230. Magdalena SZYMCZYK Poland AGH - University of Science and Technology Reliability changes of cluster system in a funtion of time.
231. Piotr SZYMCZYK Poland AGH - University of Science and Technology ESPAC - computer aided system for desining and implementing computer applications
232. Wojciech TARNOWSKI Poland Technical University of Koszalin Design of economic control system on servomechanism example
233. Jan TERPAK Slovak Republic Technical University of Kosice Modelling of gas fuel combustion.
234. Jan TERPAK Slovak Republic Technical University of Kosice Web services in comparison with other technologies.
235. Jaroslav TIMKO Slovak Republic Technical University of Kosice Modern methods of complex drives control.
236. Maria TOMAS-RODRIGUEZ England University of Sheffield On a nonlinear pole-placement algorithm.
237. Flavio TONELLI Italy University of Genoa Manufacturing execution system: Production performance information in industry operating in the plastic sector
238. Gabriel TREFA Slovak Republic U.S. Steel Kosice Slopping prediction model development based on acoustic signal.
239. Jiri TUMA Czech Republic VSB-Technical University of Ostrava Dedopplerisation in vehicle external noise measurements.
240. Jiri TUMA Czech Republic VSB-Technical University of Ostrava Full spectrum analysis in journal bearing diagnostics.
241. Andrzej URBANIAK Poland University of Technology Poznań Computer simulation of the influence of physical parameters on thermal comfort.
242. Ludmila USALOVA Slovak Republic Slovak Academy of Science Elimination of unwanted components in analyzed noise of rock drilling process.
243. Jozsef VASARHELYI Hungary University of Miskolc Modelling vector control system reconfiguration.
244. Vladimir VASEK Czech Republic Tomas Bata University Zlin Recycling technology control system.
245. Vlastimil VAVRICKA Czech Republic University of West Bohemia  Pilsen The design of low cost ultrasound flowmeter.
246. Antonin VITECEK Czech Republic VSB-Technical University of Ostrava Universal smith controller.
247. Ondrej VOLEJNIK Czech Republic Technical University of Liberec Physical dynamic lab models for automatic control.
248. Peter VOLGYESI Hungary Budapest University of Technology and Economics Robust software composition for sensor networks.
249. Radek VOTRUBEC Czech Republic Technical University of Liberec Multidimensional laboratory model of water tanks with level control.
250. Branislav VUKSANOVIC England University of Portsmouth Multichannel active noise control in open spaces.
251. Renata WAGNEROVA Czech Republic VSB-Technical University of Ostrava Robust control design for technological processes.
252. Wojciech WAWRZYŃSKI Poland Warsaw University of Technology The object-oriented approach to the control systems reliability modelling in transport.
253. Damian WIDERA Poland EMAG Katowice Machines monitoring in the MPT system in LW Bogdanka SA.
254. Grzegorz WRÓBEL Poland AGH - University of Science and Technology Utilization of scripting programming languages for aiding in development and operation of SCADA systems
255. Agata ZAŁĘSKA - FORNAL Poland Navy Academy Gdynia Applying basic splines to identification of the dynamic systems.
256. Marek ZELLMA Poland Navy Academy Gdynia Identification of state equation of an electric engine by means of the basic splines of 5th order.
257. Frantisek ZEZULKA Czech Republic University of Technology Brno Wirelless single pressure sensor.
258. Frantisek ZEZULKA Czech Republic University of Technology Brno Embedded internet orineted pressure sensor.
259. Stjepan ZGANEC Slovenia Minervo Ltd. In situ measurement of velocity of detonation and comparison of anfo and heavy anfo explosives produced in the field of usage.