List of papers ICCC 2002

149. THE FUNCTION OF CROSS CORRELATION IN COMPARING ROUNDNESS PROFILES
     ADAMCZAK, Stanisław, JANECKI, Dariusz & STĘPIEŃ, Krzysztof

150. COMPUTER METHOD OF GEOMETRICAL STRUCTURE OF A SURFACE MEASUREMENTS ACCURACY EVALUATION
     ADAMCZAK, Stanisław, MICHALSKI, Dariusz & STĘPIEŃ, Krzysztof

125. APPLICATION OF WAVELET METHODS TO MAGNETIC TESTING OF STEEL ROPES
     BATKO, Wojciech & MIKULSKI, Andrzej

100. COMPUTER-ASSISTED MEASUREMENTS IN THE SERVO-DRIVES DIAGNOSTICS BASED ON THE FEEDBACK SIGNALS EVALUATION
     BLACHARSKI, Wojciech

50. TEMPERATURE IDENTIFICATION IN FACE SEALS
    DINDORF, Ryszard

85. ACOUSTICAL HOLOGRAPHY FOR VISUALIZATION OF SOUND FIELDS
    GRÄTZ, Petr

21. DEVICE FOR EVALUATION OF INDICES OF THE THERMAL COMFORT
    HRUŠKA, František

95. THE SYSTEMS OF INDIRECT MEASUREMENT
    KOSTÚR, Karol

96. MODELS FOR INDIRECT TEMPERATURE MEASUREMENTS OF MELT IN LD CONVERTER
    LACIAK, Marek & KOSTÚR, Karol

11. THE EXPERIMENTAL CALCULATION OF THE COEFFICIENT FOR THE MULTIPORT AVERAGING PROBE
    ORLÍKOVÁ, Soňa

138. WIRELESS LAN WITH SMART INSTRUMENTS
     SMUTNÝ, Lubomír

4. MEASUREMENT SUB-SYSTEM OF ROBOT ARM POSITION
   SULEIMAN, Abdalla Ali

97. THE REALISATION OF SYSTEM OF INDIRECT MEASUREMENT TEMPERATURE IN LD – CONVERTER
    TRÉFA, Gabriel & KOSTÚR, Karol

123. PHASE DEMODULATION IN ANGULAR VIBRATION MEASUREMENTS
     TŮMA, Jiří

124. ANALYSIS OF A CAR BURST SHAKING WHILE THE CAR ENGINE IS RUNNING AT IDLE
     TŮMA, Jiří, KOČÍ, Petr, ŠKUTA, Jaromír & JURÁK, Michal

Section 2: Identification, modelling and simulation of processes and systems

144. CALCULATION OF ELASTIC MOVEMENTS OF THE CUTTING TECHNOLOGICAL SYSTEM
     ABU SHREEHAH, Tareq A.

29. THE SIMULATION OF GAS FLOW IN MEASURING TUBE
    ADÁMEK, Milan & MATÝSEK, Miroslav

145. PHYSICAL AND MATHEMATICAL MODELING OF AUTOMATICALLY CONTROLLED MOVING OBJECTS
     AL-AZAB, Tariq

139. VISCOSITY SOLUTIONS AND APPROXIMATIONS TO CHARACTERISTICS OF THE HJB EQUATION
     BANKS, S.P.

9. CHOOSING THE NUMBER OF MODELS OF THE REFERENCE MODEL USING MULTIPLE MODELS ADAPTIVE CONTROL SYSTEM
   BICĂ, Marin, PATRICIU, Victor-Valeriu & PODARU, Vasile

91. ORDER SYSTEMS REDUCTION BY SINGULAR PERTUBATIONS METHOD APPLICATION TO AN ELECTROHYDRAULIC SYSTEM
    BOBASU, Eugen

61. THE METHODS OF IMPROVING OF SPATIAL RESOLUTION OF IMAGES
    BRADÁČ, František

51. MODELLING AND SIMULATION OF THE HYDRAULIC CONTROL SYSTEM WITH ELASTICALLY MOUNTED LOAD MASS
    DINDORF, Ryszard

117. OPERATOR - SPECIALIST CRANE SYSTEM MODEL
     SZPYTKO, Janusz, DRZYMAŁA, Zygmunt & MICHLOWICZ, Edward

89. MATHEMATICAL MODEL OF THE THEORETICAL TEMPERATURE OF THE BLAST FURNACE
    TERPÁK, Ján, DORČÁK, Ľubomír, KOŠTIAL, Imrich & PETRÁŠ, Ivo

43. SOME CONSIDERATION ABOUT MODELLING HUMAN PROCESS AND MECHAMISM
    TRUŢĂ, Adriana-Meda, BICĂ, Marin & ZENOVIC, Gherasim

Section 3: Control systems and instrumentation

30. CONTINUALIZATION OF STRUCTURAL CYBERNETIC SYSTEMS
    ARNOŠT, René & ŽAMPA, Pavel

136. ANALYTICAL DETERMINING OF FORCES AND PRESSURES DURING ELECTRODYNAMICAL METAL FORMING
     BEDNARCZYK, Józef, KOT, Andrzej & GŁUCH, Gerard

55. FRACTIONAL-ORDER STATE SPACE MODELS
    DORČÁK, Ľubomír, PETRÁŠ, Ivo, KOŠTIAL, Imrich & TERPÁK, Ján

82. SENSITIVITY FUNCTIONS OF CONVERTER AC ELECTRIC DRIVING SYSTEM ON THE ANTI-PARALLEL CONVERTER PARAMETERS VARIATIONS
    GŁOWACZ, Zygfryd & JARACZ, Kazimierz

148. THE DOMINANT MULTIPLE POLES METHOD TO CONTROLLER TUNING
     HALÁSEK, Tomáš

22. CONTINUOUS CONTROL OF AC ELECTRICAL POWER IN AUTOMATION SYSTEMS
    HRUŠKA, František

53. STABILITY ANALYSIS OF ACTIVE FACE SEALS
    KUNDERA, Czesław

114. DECENTRALIZED CONTROL WITH IDENTIFICATION
     MACHÁČEK, Jiří

48. DETERMINISTIC INTERPRETATION OF LQG OPTIMALITY
    MOŠNA, Jiří & PEŠEK, Pavel

75. CLOSED LOOP CONTROL OF THE SYSTEM WITH THE MODES OF DIFFERENT DYNAMICS AND DAMPING
    NOSKIEVIČ, Petr

70. DECENTRALIZED ADAPTIVE CONTROL: INFLUENCE OF IDENTIFICATION ALGORITHM ON CONTROL
    PERŮTKA, Karel, BOBÁL, Vladimír & NAVRÁTIL, Petr

2. A ROBUST STABILITY TEST PROCEDURE FOR A CLASS OF UNCERTAIN LTI FRACTIONAL ORDER SYSTEMS
   PETRÁŠ, Ivo, CHEN, YangQuan & VINAGRE, Blas M.

90. MULTIVARIABLE CONTROL STRATEGIES FOR A BIOTECHNOLOGICAL PROCESS
    PETRE, Emil

87. SUBOPTIMAL CONTROL OF SYSTEMS WITH INPUT DELAY
    POPESCU, Dan

33. CONTROL OF HIGHER ORDER SYSTEM USING DELTA MODELS
    SYSEL, Martin & BOBÁL, Vladimír

141. ADAPTATIVE CONTROL SYSTEM OF OVERHEAD CRANE’S MOVEMENT MECHANISMES
     SZPYTKO, Janusz, SMOCZEK, Jarosław & ŁAKOMSKI, Damian

102. ADAPTIVE NEURO-CONTROL USING THE DIRECT INVERSE METHOD
     ŠKUTOVÁ, Jolana

120. THE PROBLEMS WITH DIRECT INVERSE NEURAL CONTROL
     TAUFER, Ivan & DRÁBEK, Oldřich

115. ROBUST CONTROL ALGORITHMS DESIGN
     VÍTEČEK, Antonín & VÍTEČKOVÁ, Miluše

116. ANALYTICAL CONTROLLER TUNING METHOD FOR PROPORTIONAL NON-OSCILLATORY PLANTS WITH TIME DELAY
     VÍTEČKOVÁ, Miluše & VÍTEČEK, Antonín

42. OPTIMAL SETTING OF PARAMETERS OF NONLINEAR SYSTEMS
    ZÁDA, Václav

73. DOMINANT POLE ASSIGNMENT FOR TIME DELAY SYSTEMS
    ZÍTEK, Pavel & VYHLÍDAL, Tomáš

Section 4: Robotics and automation

15. COMPUTER SELECTION OF MINING LINK CHAINS FOR ARMOURED FACE CONVEYORS
    ANTONIAK, Jerzy

80. EXPERIMENTAL DETERMINATION OF MOTION PARAMETERS DURING PIPE BULGING IN PULSE MAGNETIC FIELD
    BEDNARCZYK, Józef & GŁUCH, Gerard

59. BLUETOOTH FOR LOW-LEVEL PROCESS CONTROL
    BRADÁČ, Zdeněk, ZEZULKA, František, KUČERA, Pavel, FOJTÍK, Pavel, CACH, Petr & FIEDLER, Petr

56. CONTROL OF SPEED OF TURBOEXHAUSTERS FOR AGGLOMERATION BELT
    DORČÁK, Ľubomír, TERPÁK, Ján, KOŠTIAL, Imrich & PETRÁŠ, Ivo

106. MONITORING OF HIGHLY HEATED MATERIAL FLOW FOR INCREASING RELIABILITY AND QUALITY OF PRODUCTION CONTROL SYSTEMS IN METALLURGY
     HEGER, Milan & FRANZ, Jiří

142. TESTING OF A CAR ENGINE CONTROL UNIT USING THE HARDWARE-IN-THE-LOOP SIMULATION
     JURÁK, Michal & TŮMA, Jiří

112. ELECTROHYDRODYNAMIC MINING METHOD FRIENDLY FOR NATURAL ENVIRONMENT
     KOTWICA, Krzysztof & REŚ, Janusz

35. AUTOMATION SYSTEM FOR RUBBER CARACTHERISTICAL ANALISE
    OLARU, Onisifor, MIHĂILESCU, Adrian, GROFU, Florin & POPESCU, Marian

6. FRACTIONAL DIGITAL CONTROL OF A HEAT SOLID: EXPERIMENTAL RESULTS
   PETRÁŠ, Ivo, VINAGRE, Blas M., DORČÁK, Ľubomír & FELIU, Vincent

153. THE COMPUTER CONTROL SYSTEM IN TANNING PROCESSES
     PHAM MANH, Thang & VAŠEK, Vladimír

23. TEMPERATURE CONTROL IN THE TECHNOLOGY PROCESS DRYING
    POKORNÝ, Pavel & VAŠEK, Vladimír

38. CONTROL SYSTEM FOR VULCANISATION PROCESS OF RUBBER BELTS, USING EVOLVED ALGORITHMS
    POPESCU, Marian, POPESCU, Luminita, OLARU, Onisifor & GROFU, Florin

7. INDUSTRIAL ROBOTS AND COMPUTER VISION
   SALOKY, Tomáš

103. THE MONITORING AND CONTROL SYSTEM FOR THE REAL EQUIPMENT CONTROLLED BY PLC
     SYSALA, Tomáš

52. DECENTRALISED CONTROL SYSTEM BASED ON THE MICROCONTROLLER CADRS
    SZABÓ, Štefan & HAMMER, Miloš

46. COMMUNICATION PROBLEMS IN REAL-TIME AND EMBEDDED SYSTEMS
    SZYMCZYK, Magdalena

60. SMALL-SCALE MODULAR LABORATORY CONTROL SYSTEM
    ZEZULKA, František, BRADÁČ, Zdeněk, VÍTEK, Petr, SUŠINA, Radek, MICHLÍČEK, Pavel & KRYSTÝNEK, Pavel

Section 5: Information systems (SCADA/HMI, GIS, MES) and their Internet support

74. PLANT CONTROL WITH THE USE OF SMS SERVICE
    BŁAŻEWICZ, Jacek & KLAUS, Rafał

66. APPLICATION OF LONWORKS NETWORKS FOR INTRINSICALLY SAFE CONTROL OF MINING ROPE TRANSPORT SYSTEMS
    CZYRWIK, Sebastian, FERUŚ, Jacek, HEYDUK, Adam, LANGHAMMER, Michał, MIŚKIEWICZ, Kazimierz & SZEBESTA, Krystian

37. APPLICATION OF GEOGRAPHIC INFORMATION SYSTEM (GIS) TO THE ASSESSMENT OF SOIL CONTAMINATION
    DAWIDOWSKI, Andrzej, BZOWSKI, Zbigniew & KONOPA, Wojciech

58. MONITORING AND CONTROL OF HEAT DISTRIBUTION
    GREGA, Wojciech & KOŁEK, Krzysztof

143. THE ENVIRONMENTAL AND ECONOMICAL EVALUATION OF THE DEVELOPMENT WASTE IN THE SLOVAK REPUBLIC
     HANZELOVÁ, Marcela & BENKOVÁ, Marta

156. MODELLING OF ENERGETIC NETWORKS
     KOLOMAZNÍK, Ivan & STRAKOŠ, Vladimír

19. FAULT TOLERANT ASSEMBLY LINE AS MULTI-AGENT SYSTEM
    KONYUKH, Vladimir & IGNATIEV, Jaroslav

113. WEB CAM USING FOR REAL-TIME TASKS MONITORING IN CONTROL WEB 2000 SYSTEM
     ŠKUTA, Jaromír

Section 6: Engineering application of informatics

158. IMPLEMENTATION OF USER-FRIENDLY PROGRAMMING ENVIRONMENT FOR STANDALONE MICRO-CONTROLLERS
     BABIUCH, Marek

93. KNOWLEDGE BASED SYSTEM IN DESIGN SYNTHESIS
    BARNOSCHI, Adriana, PODARU, Vasile & TRUŢĂ, Adriana-Meda

16. ANALYSIS OF CHAOTIC SIGNALS: NON-LINEAR METHODS VERSUS NEURAL NETWORKS
    BÍLA, Jiří & ULIČNÝ, David

1. DEVELOPING AND REMOTE CONTROL OF WEB INFORMATION SYSTEMS
   FARANA, Radim & SMUTNÝ, Lubomír

25. CLIENTS TIME SYNCHRONIZATION
    HOROVČÁK, Pavel & LEŠŠO, Igor

27. THE APPLICATION OF TCP/IP IN COMMUNICATION INTERFACE BY WWW MONITORING
    HOROVČÁK, Pavel, BALUCH, Dušan & TERPÁK, Ján

24. THE GENERATION OF TEST DATA USING GENETIC ALGORITHMS AND CASE BASED REASONING FOR SAFETY CRITICAL SYSTEMS
    IRGENS, Christopher, LANDRYOVÁ, Lenka & SALAMA, Mohamad

5. IMPLEMENTATION ISSUES OF PKI TECHNOLOGY
   PATRICIU, Victor-Valeriu, BICA, Marin & BICA, Ion

72. SELF-MOTIVATED AUTONOMOUSE AGENTS
    PETRUS, Michal, NAHODIL, Pavel & KADLEČEK, David

94. OVERVIEW ON DESIGN STAGE IN KBS ENVIRONMENT
    PODARU, Vasile, BARNOSCHI, Adriana & MAKSAY, Stefan

36. REALIZATION OF A NUMERICAL PROTECTION AT AN ELECTRICAL TRANSFORMER
    POPESCU, Luminita, OLARU, Onisifor, GROFU, Florin & POPESCU, Marian

14. SCIENTIFIC RESEARCH OF AFC DRIVE SYSTEMS WITH SILICON CONTROLLED RECTIFIER
    ROSIKOWSKI, Janusz

18. SELECTED PROBLEMS OF THE UNCERTAINTY DETERMINATION OF MEASUREMENTS AND COMPUTATIONAL VALUE IN THERMAL PROCESSES
    SZEGA, Marcin & RUSINOWSKI, Henryk

Section 7: Quality control systems (TQM), production management and industrial logistics

62. OPTIMAL AGENT COALITION STRUCTURES IN PRODUCTION SYSTEMS
    BUDINSKÁ, Ivana, FRANKOVIČ, Baltazár & DANG, T-Tung

10. SIMULATION MODEL DEVELOPMENT FOR UNDERGROUND MINE LOGISTIC
    BURÝ, Alois & ČECH, René

159. PROJECT OF A TECHNOLOGICAL UNIT FOR RECOVERY OF USEFUL COMPONENTS FROM BLACK COAL FLY ASHES FROM POWER PLANTS
     FARKAŠOVÁ, Adriana, FLOREKOVÁ, Ľubica & MICHALÍKOVÁ, Františka

98. A PROTECTION OF AIR FROM THE POINT OF VIEW OF LOCAL PRODUCER OF POLLUTING SUBSTANCES/EMISSIONS
    HANZELOVÁ, Marcela, FLOREKOVÁ, Ľubica & BENKOVÁ, Marta

99. DIAGNOSTICS OF MACHINE TOOLS DYNAMIC PROPERTIES
    KOČÍ, Petr

44. PRODUCTION DATA MANAGEMENT SYSTEM AS A TOOL FOR ENGINEERING DATABASES INTEGRATION IN SMALL MACHINE-BUILDING ENTERPRISE
    LOBUR, Mykhaylo, KERNYTSKYY, Andriy & WRÓBEL, Jerzhy

119. DETERMINATION OF OPTIMAL QUALITIES OF PRODUCTS DURING RESEARCH, DESIGN AND CONSTRUCT STAGES USING THE MATHEMATICAL METHODS
     NASIR, Kloub

81. THE PROPOSAL OF THE EXPERT SYSTEM FOR SPC
    NOSKIEVIČOVÁ, Darja

17. ENERGY EVALUATION OF A HEAT-AND-POWER UNIT OPERATION TOGETHER WITH THE CHECKING OF THE VALIDITY OF THE RESULTS OF MEASUREMENTS
    RUSINOWSKI, Henryk & SZEGA, Marcin

45. DEVELOPING SERVICE LEVEL AGREEMENT FOR OUTSOURCED PROCESSES AND SYSTEMS
    SZYMCZYK, Piotr

154. THE IMPLEMENTATION REENGINEERING PROCESSES – MODEL OF PROCESS CONTROLLED CHANGE
     VACEĽ, Rastislav & FLOREKOVÁ, Ľubica

76. AUDIT AS AN IMPLEMENT CONTROL AND ESTIMATING OF COMPARISON CRITERIA
    VITKO, Dušan

157. THE EXPERIENCES OF THE PROCEDURAL MANAGEMENT
     WOLF, Petr

Section 8: Engineering education in control and computer systems

88. LABORATORY FOR EDUCATION OF INTEGRATED AUTOMATION SYSTEMS
    ÁDÁM, Tihamér, CZEKKEL, János & DALMI, István

41. EXPERIENCES WITH THE TEACHING OF CONTROL TECHNIQUES FOR ENGINEER STUDENT
    ÁDÁM, Tihamér, CZEKKEL, János & DALMI, István

160. RECENT DEVELOPMENT IN INTERNATIONAL COOPERATION IN ENGINEERING EDUCATION AND RESEARCH
     AUNG, Win & FARANA, Radim

39. COMPUTER AIDED AUTOMATIC CONTROL THEORY
    BALÁTĚ, Jaroslav & NAVRÁTIL, Pavel

57. VIRTUAL MODELS AS AN AID OF LOGIC CONTROL TRAINING
    KRÁLOVCOVÁ, Jiřina & HERNYCH, Miloš

20. ADAPTIVE CONTROL OF COUPLED DRIVES APPARATUS
    KUBALČÍK, Marek & BOBÁL, Vladimír

107. DATABASE SYSTEM FOR RECORDING OF TRAINING COURSES
     PAVLAS, Roman

Section 9: Last minute papers

101. EVOLUTIONARY COMPUTING METHODS FOR OPTIMISING VIRTUAL REALITY PROCESS MODELS
     ALAM JAN, Javed & ŠULC, Bohumil

92. ADAPTIVE DB(n) ALGORITHM WITH ANTIWINDUP
    ALEXÍK, Mikuláš

86. DETERMINATION OF CRITICAL PARAMETERS IN MECHANICAL TESTING METHODS OF ELECTRIC DETONATORS ACCORDING TO NEW DRAFTS OF EUROPEAN STANDARDS
    DOBRILOVIĆ, Mario, ESTER, Zvonimir & VRKLJAN, Darko

84. NUMERICAL MODEL OF CONTACT COMPLIANT GRIPPING ELEMENT WITH AN OBJECT OF HANDLING
    HORÁK, Marcel & NOVOTNÝ, František

151. SMALL INTERNET MONITORING AND CONTROL DEVICE
     JACHIMSKI, Marcin, HAYDUK, Grzegorz, WRÓBEL, Grzegorz, ZYGMUNT, Henryk & KWASNOWSKI, Paweł

8. THE NOVEL APPROACH TO ROBUST STATE FEEDBACK CONTROLLER DESIGN
   JANEČEK, Josef & HERAJN, Pavel

161. WINDOWS CE PRACTICAL DEPLOYMENT IN REAL-TIME APPLICATIONS
     KAČMÁŘ, Dalibor

152. PROCESS DATA VISUALIZATION AND MONITORING USING INTERNET
     LANDRYOVÁ, Lenka & KOZIOREK, Jiří

49. THE NETWORK MONITORING AND CONTROL SYSTEM FOR TECHNOLOGICAL PROCESSES BASED ON OS LINUX
    MATÝSEK, Miroslav & ADÁMEK, Milan

128. DESCRIPTION OF VIBRATIONS OF A CONCENTRATING TABLE WITH AN INERTIAL-BUMPER-DRIVE
     OPRZĘDKIEWICZ, Iwona & FILIPOWICZ, Artur

79. DIRECTIONAL CONTROL OF MICROTUNNELING MACHINE BY USING NEURAL NETWORK
    SAPIŃSKI, Bogdan, PODSIADŁO, Andrzej & PLUTA, Janusz

109. EDUCATION OF STUDENTS WITHIN ENVIRONMENT ENGINEERING COURSE OF AUTOMATION AND CONTROL SUBJECTS. EXPERIENCE OF POZNAŃ UNIVERSITY OF TECHNOLOGY
     SOZAŃSKI, Marek M., SROCZAN, Eugeniusz M. & URBANIAK, Andrzej

155. NONLINEAR CONTROL SYSTEMS SYNTHESIS
     WAGNEROVÁ, Renata

47. OBJECT ORIENTED MODELLING OF A TRAINING SIMULATOR
    ALAM JAN, Javed, ŠULC, Bohumil & NEUMAN, Petr

68. A NEW METHODOLOGY FOR INTELLIGENT AND DISTRIBUTED PROCESS CONTROL BASED ON NEURAL NETWORKS
    BONASTRE, Alberto, CAPELLA, Juan V. & ORS, Rafael

146. INCLUSION OF WEATHER INFLUENCES IN CALCULATION OF HEAT SUPPLY DAILY DIAGRAM FORECAST
     CHRAMCOV, Bronislav, BALÁTĚ, Jaroslav & PRINC, Michal

147. ANALYSIS OF HYDRAULIC AND HEAT RELATIONS IN HEAT NETWORKS; CALCULATION IN REAL LOCALITY
     PRINC, Michal, BALÁTĚ, Jaroslav & CHRAMCOV, Bronislav

118. OPTIMIZATION OF CHROME SHAVINGS TREATMENT BY ENZYMATIC DIGESTION
     JANÁČOVÁ, Dagmar, KOLOMAZNÍK, Karel & VAŠEK, Vladimír

129. FUZZY LOGIC TIME-OPTIMAL CONTROLLER
     SIBIELAK, Marek & RĄCZKA, Waldemar

131. ANALYSIS OF PROPERTIES OF ACTUATORS USED IN VIBRATION CONTROL SYSTEMS
     KOWAL, Janusz & ORNACKI, Roman

110. REAL-TIME APPLICATIONS IN WINDOWS NT
     VAŠEK, Vladimír, BLIŽŇÁK, Michal & PERŮTKA, Karel